HOT MELT
Technical Data Sheet
IH-401 (12 x 200mm Stick)
IH-401 is an EVA based hot melt adhesive designed for stick glue gun
application.
| Main use |
Hot melt adhesive for stick glue gun applicator |
General
characteristics |
Good workability
Good initial and final adhesion
Good heat resistance
Good tack |
| Properties |
Appearance
Color
Solid contents
Viscosity
Softening point
Lbs/gallon
Packaging |
Solid
White
100 %
Approx 14,000 ¡¾2,500 cps @180¡É
Approx 17,300 ¡¾2,500
cps @160¡É
Approx 82 ¡¾5 ¡É
8.0 12¡Ë Stick |
| Method |
Hot melt adhesive for stick glue gun applicator.
Well balance in both adhesion and cohesion strength. Good adhesion
and high viscosity & temperature performance.
Suggested running temperature : 140 ¡180 ¡É
Can be used on all conventional hot melt wheel, nozzle, slot,
spiral spray, melt-blown, and control coat applicators. |
| Cautions |
Material is applied hot – appropriate
clothing and eye protection should be used.
Use adequate ventilation to remove any hot melt fumes or vapors
that are generated..
Rotate stock – first in, first out. |
Technical Data Sheet
IH-402 (43 x 43mm Stick)
IH-402 is an EVA based hot melt adhesive designed for stick glue gun
application.
| Main use |
Hot melt adhesive for stick glue gun applicator |
General
characteristics |
Good workability
Good initial and final adhesion
Good heat resistance
Good tack |
| Properties |
Appearance
Color
Solid contents
Viscosity
Softening point
Lbs/gallon
Packaging |
Solid
Light Yellow
100 %
Approx 13,200 ¡¾2,500 cps @180¡É
Approx 62,000 ¡¾2,500
cps @160¡É
Approx 99 ¡¾5 ¡É
8.0
43¡Ë Stick |
| Method |
Hot melt adhesive for stick glue gun applicator.
Well balance in both adhesion and cohesion strength. Good adhesion
and high viscosity & temperature performance.
Suggested running temperature : 140 ¡180 ¡É
Can be used on all conventional hot melt wheel, nozzle, slot,
spiral spray, melt-blown, and control coat applicators. |
| Cautions |
Material is applied hot – appropriate
clothing and eye protection should be used.
Use adequate ventilation to remove any hot melt fumes or vapors
that are generated..
Rotate stock – first in, first out. |
Technical Data Sheet
IH-403 (1kg Block)
IH-403 is an EVA based hot melt adhesive designed for refrigerator
application.
| Main use |
Hot melt adhesive for refrigerator |
General
characteristics |
Good workability
Good initial and final adhesion
Good heat resistance
Good tack |
| Properties |
Appearance
Color
Solid contents
Viscosity
Softening point
Lbs/gallon
Packaging |
Solid
Yellow
100 %
7,000 ¡¾1,500 cps / 160¡¾1¡É
90 ¡¾5 ¡É
8.0
1Kg Block |
| Method |
Hot melt adhesive for refrigerator. Well balance
in both adhesion and cohesion strength. Good adhesion and high
viscosity & temperature performance.
Suggested running temperature : 140 ¡180 ¡É
Can be used on all conventional hot melt wheel, nozzle, slot,
spiral spray, melt-blown, and control coat applicators. |
| Cautions |
Material is applied hot – appropriate
clothing and eye protection should be used.
Use adequate ventilation to remove any hot melt fumes or vapors
that are generated.
Keep containers and premelters covered to avoid contamination.
Rotate stock – first in, first out.
Do not mix with other adhesives. |
|
|
